ML2430

ML系列产品优势
工作电压高:标称电压3.0V,工作电压平台在2.5V以上,是镍氢电池工作电压的2倍以上。
安全性能卓越:不存在任何过充、过放的危险性。
耐过充性能优良:在高温下热量变化很小,稳定性好,耐过充能力更强。
放电性能优越:电池的放电曲线平坦,具有较好的循环寿命和较高的充放电效率。放电平台平稳,有利于电子器体稳定工作。
循环性能优越:充放电过程中没有影响电化学效应的体积效应产生,电池具有良好循环性能。
宽广的使用温度:-20~+60℃下能正常工作。

  • 描述
  • Inquiry

TECHNICAL  DATA

1.Anode shell

2.Anode collector net

3.Anode (slice of lithium)

4.Separator

5.Gasket

6.Cathode(LixMnO2)

7.Cathode collector net

8.Cathode shell

ITEM CHARACTERISTICS NOTES
Nominal voltage 3.0 V No load
Nominal capacity 100 mAh Under normal temperature, discharging at the rate of 0.5 mA to 2.0V.
Charge and discharge current ≤0.5 mA Normal temperature.
Cycle life 200~300 Discharge current 0.5mA, in the case of 10% discharge depth, can be recycled 200-300 times .
Charging voltage 3.1 ~3.3 V Small current charging
Open circuit voltage ≥3.0 V No load
Storage temperature 20~25℃ RH: 50±10%
Standard weight 3.9 g Each cell
Dimension of shape Diameter: 24.0(-0.2) mm

Height: 3.0(-0.3) mm

Using the vernier caliper of the accuracy.
Self-discharge rate ≤5% Stored for 12 months under the condition of normal temperature and humidity.
Appearance Appearance is level, smooth and clear, no distortion, no rust Eyeballing
Vibration test Put the charger on the vibrator and use the 10-15 times per minute frequency to vibrate the charger for one hour, the charger performance is stable. The charger performance is stable.
Falling test Put the charger from 2m height to the floor by vertical direction and free direction, after 5 times, the charger performance is stable. The charger performance is stable.

 

TECHNICAL  CHARACTERISTICS

  1. 1.The methods of testing

A: environment and temperature: 20~25℃; the environment humidity of 50±10%.

B: Charge at the rate of the constant current 0.5mA to 3.25V, changing it into the constant current for 60 minutes, keeping it still for 10 minutes; Discharge at the rate of the constant current 0.5mA to 2.0V.

 

  1. 2. Caution

2.1 Install and use the cells right, avoid short circuit and shun reversing anode and cathode.

2.2 Check the cell polarity and the equipment including its conjunction before installing, ensuring the cleanness and conductibility, the equipment should not cause short circuit.

2.3 Do not mix the new cells with the old ones, and not mix the different volume, brand, grade, type cells lest affecting characteristics and the possibility of leaking.

2.4 The cells should not be heated and collided after being used lest explosion, damage and liquid-leaking.

2.5 Don’t use too high current to charge and discharge when using the cells, do not overcharge and discharge lest affecting the cycle life of the cells.

2.6 To avoid danger, don’t put the cells into the fire disassemble the cells.

2.7 Taking care of the micro-cells well lest the infants swallow.

2.8 Pay attention to the storage expiry of the cells.

 

  1. 3.【SPECIFICATIONS】

 

Nominal Capacity 100 mAh
Nominal Voltage     3.0 V
Standard Charge/Discharge Current  0.5 mA
Charge/Discharge Cycle Characteristics Discharging Depth of 10% 300 times
Discharging Depth of 20% 100 times
Temperature Range  -20~60 ℃
Weight                    3.9 g
Dimensions       Diameter 24 mm
Height 3.0-0.3 mm
d  21.8 mm

 






Online Service
Live Chat